Here’s what I would do as stated in Garage Door Repair Sherman TX:
Step 1: Locate the “learn” button on the garage door opener. I would check the back of the motor unit or near the antenna wire to find the button. It may be labeled “learn,” “program,” or “set.”
Step 2: Press and hold the “learn” button for about 10 seconds until the indicator light on the motor unit turns on and then off. This puts the garage door opener into programming mode.
Step 3: Enter the new code on the keypad. I would choose a four-digit code that’s easy for me to remember but difficult for others to guess. I’d avoid using sequential numbers or numbers that could be associated with personal information, such as my birthdate.
Step 4: Press the “enter” button on the keypad. The motor unit will beep or flash its lights to indicate that the new code has been accepted.
Step 5: Test the new code by entering it on the keypad and making sure the garage door opens and closes smoothly. If it doesn’t, I’d double-check that I entered the new code correctly.
Step 6: Reprogram any remotes or keypads that are connected to the garage door opener. To do this, I would press the “learn” button on the motor unit and then press the button on the remote or keypad that I want to program. I’d repeat this process for each additional remote or keypad.
Step 7: Update any smart home devices that are connected to the garage door opener. This could include a voice assistant or smart lock, for example.
Step 8: Keep the new code secure by not sharing it with anyone who doesn’t need access to the garage and avoiding writing it down in a place where it could be easily discovered.
Overall, as stated in Garage Door Repair Sherman TX, changing the code on a garage door opener is a relatively simple process that can be completed in just a few minutes. It’s important to choose a secure code and keep it confidential to ensure the safety and security of my home.
Grayson County Garage Door Repair
1940 Everheart Rd, Bells, TX 75414, United States
903-500-7205