When it comes to installing a new Garage Door Repair Chandler, AZ, measuring is an essential step to ensure that you get the right size and fit for your garage. Measuring for a garage door can be a daunting task, especially if you’re not familiar with the process.

In this article, we’ll provide you with a comprehensive guide on how to measure for a garage door.

Step 1: Measure the Width

The first step in measuring for a garage door is to determine the width of the opening. To do this, you will need to measure the width of the opening at the widest point. Take a measuring tape and measure the distance between the two sides of the opening. Make sure to measure from the inside of the left side of the opening to the inside of the right side of the opening. Be sure to measure in several places to ensure that the opening is the same width all the way across.

Step 2: Measure the Height

The next step is to measure the height of the opening. To do this, take a measuring tape and measure the distance from the floor to the top of the opening. Again, measure in several places to ensure that the height is consistent all the way across.

Step 3: Measure the Headroom

Headroom is the distance between the top of the garage door opening and the ceiling. This measurement is important because it determines the amount of space you have available for the garage door track and hardware. To measure headroom, take a measuring tape and measure from the top of the opening to the ceiling. You will need a minimum of 12 inches of headroom to install a standard garage door. However, if you plan to install a garage door opener, you will need additional headroom.

Step 4: Measure the Sideroom

Sideroom is the distance between the sides of the garage door opening and the nearest wall or obstruction. This measurement is important because it determines the amount of space you have available for the garage door track and hardware. To measure sideroom, take a measuring tape and measure the distance from the side of the opening to the nearest wall or obstruction. You will need a minimum of 3.75 inches of sideroom on each side of the opening for standard garage doors.

Step 5: Measure the Backroom

Backroom is the distance from the opening to the back of the garage. This measurement is important because it determines the amount of space you have available for the garage door to operate. To measure backroom, take a measuring tape and measure the distance from the opening to the back of the garage. You will need a minimum of 18 inches of backroom for standard garage doors.

Step 6: Determine the Type of Garage Door

After you have measured the width, height, headroom, sideroom, and backroom, you need to determine the type of garage door that will fit your opening. There are several types of garage doors available, including sectional, roll-up, and tilt-up garage doors. Each type of garage door has different requirements, so it is important to choose the right type of door for your garage.

Step 7: Consult a Professional

If you’re not sure about how to measure for a garage door or if you’re unsure about the type of garage door that will fit your opening, it’s best to consult with a professional. A garage door installation company can help you determine the right size and type of garage door for your garage.

Conclusion

Measuring for a Garage Door Repair Chandler, AZ is an important step in the installation process. To ensure that you get the right size and fit for your garage, you need to measure the width, height, headroom, sideroom, and backroom of the opening.

Acclaim Garage Door of Chandler AZ

184 E Chilton Dr, Chandler, AZ 85225, United States

1-480-545-0538