A Garage Door Repair Decatur TX with a broken spring can be a frustrating situation for any homeowner. The garage door spring is responsible for counterbalancing the weight of the door, making it easier to open and close. When the spring breaks, it can make it difficult or even impossible to operate the door.
However, there are some steps you can take to open a Garage Door Repair Decatur TX with a broken spring safely.
Step 1: Assess the Situation
The first step is to assess the situation and determine the type of spring system your garage door has. There are two types of garage door springs: torsion and extension. Torsion springs are mounted above the garage door opening and are secured to a metal shaft. Extension springs are mounted on both sides of the door and stretch along the horizontal tracks.
If you have a torsion spring system, you will notice a metal shaft running across the top of the door with one or two springs mounted on it. If you have an extension spring system, you will see two springs mounted on the horizontal tracks on either side of the door.
Step 2: Disengage the Opener
Next, you will need to disengage the opener from the door. This is an important step to prevent the opener from trying to lift the heavy door with the broken spring, which can cause further damage or even injury.
To disengage the opener, look for the emergency release cord or handle on the opener. Pulling the cord or handle will disengage the opener from the door. You may need to consult your garage door opener manual if you are unsure where the emergency release is located.
Step 3: Open the Door Manually
Once the opener is disengaged, you can now manually open the door. Depending on the type of spring system you have, you will need to use a different technique to open the door manually.
Torsion Spring System:
To open a garage door with a broken torsion spring, you will need to use a winding bar. The winding bar is a metal rod that is used to wind and unwind the spring. Insert the winding bar into one of the holes on the metal shaft, and slowly turn the bar until the tension is released from the spring. Once the tension is released, you can lift the door manually.
Extension Spring System:
To open a garage door with a broken extension spring, you will need to use the red release handle located on the side of the door. Pull the handle to release the tension from the springs, and then lift the door manually.
Step 4: Secure the Door
Once you have opened the door manually, it is important to secure it in place to prevent it from falling back down. You can use c-clamps or locking pliers to secure the door to the tracks on either side. This will prevent the door from accidentally closing or falling back down while you are working on it.
Step 5: Call a Professional
While you can open a garage door with a broken spring manually, it is important to remember that this is only a temporary solution. A broken spring is a serious issue that should be repaired by a professional garage door technician.
Attempting to replace the spring yourself can be dangerous and can cause further damage to the door or even personal injury. It is best to call a professional technician who has the knowledge and tools to safely repair or replace the broken spring.
In conclusion, a broken spring can be a frustrating situation for any homeowner. However, by following these steps, you can safely open your garage door manually and secure it in place until a professional technician can repair or replace the broken spring. Remember to always prioritize safety and never attempt to repair the spring yourself.
Decatur’s Best Garage Door
248 Private Rd 1377, Alvord, TX 76225, United States
1-940-242-3016