Replacing a garage door spring can be a dangerous task if you are not familiar with the process. It is always recommended to hire a professional garage door technician to perform this task.

According to Bedford Garage Door, if you are experienced in garage door repairs and feel confident in your abilities, you can follow these steps to replace a garage door spring:

  1. Gather the necessary tools: You will need a few tools to replace the garage door spring, including a winding bar, a socket wrench set, pliers, a ladder, and safety goggles.
  2. Release tension on the garage door spring: Before you can replace the garage door spring, you need to release the tension on the existing spring. This is done by opening the garage door fully and using a winding bar to loosen the set screws on the torsion spring. Make sure to keep a firm grip on the winding bar at all times to prevent injury.
  3. Remove the old garage door spring: Once the tension is released, you can safely remove the old garage door spring. Use a socket wrench to loosen the bolts on the spring anchor bracket and remove the bracket from the wall.
  4. Install the new garage door spring: Install the new garage door spring onto the anchor bracket and secure it in place with the bolts. Use pliers to secure the end of the spring to the winding cone.
  5. Wind the new garage door spring: Wind the new garage door spring using the winding bar. Make sure to wind the spring in the correct direction and to apply the correct amount of tension. A professional garage door technician can help you determine the appropriate tension for your specific door.
  6. Test the new garage door spring: After the new garage door spring is installed and wound, test the door to ensure that it opens and closes smoothly. If there are any issues, adjust the tension as needed.
  7. Replace the safety cables: Replace the safety cables on the garage door. These cables are designed to prevent the garage door from falling in the event that the spring breaks.
  8. Test the garage door again: Test the garage door several times to ensure that it is functioning properly. If there are any issues, contact a professional garage door technician for assistance.

Overall, based from Bedford Garage Door, replacing a garage door spring is a complex task that requires experience and knowledge. If you are not comfortable with this task, it is always recommended to hire a professional garage door technician to perform the job. Remember to prioritize safety at all times and wear protective gear when working on garage door springs.

Bedford Overhead & Garage Door

2200 Airport Fwy Suite 555, Bedford, TX 76022

817-373-5968