Replacing old style garage door springs can be a challenging task, but it is something that can be done by a DIY enthusiast with the right tools and knowledge.
Here are the steps to replace old style garage door springs according to Temple Garage Door:
Step 1: Gather the necessary tools and materials Before you start replacing your old style garage door springs, gather all the necessary tools and materials such as winding bars, pliers, a socket wrench, a ladder, and new garage door springs that are the same size and rating as your old ones.
Step 2: Release the tension on the old springs Use the winding bars to release the tension on the old springs. Insert one winding bar into the hole on the winding cone and hold it in place. Insert the second winding bar into another hole on the same cone, and slowly turn the cone counterclockwise to release the tension on the spring. Repeat this process on the other spring.
Step 3: Remove the old springs Once the tension is released on the old springs, use a socket wrench to remove the bolts that hold the springs to the brackets on the garage door. Remove the old springs and discard them.
Step 4: Install the new springs Install the new springs by attaching them to the brackets on the garage door. Use the bolts to secure the springs in place, making sure that they are tightly fastened. Make sure that the new springs are the same size and rating as the old ones.
Step 5: Wind the new springs Wind the new springs using the winding bars. Insert one winding bar into the hole on the winding cone and hold it in place. Insert the second winding bar into another hole on the same cone, and slowly turn the cone clockwise to wind the spring. Repeat this process on the other spring.
Step 6: Test the garage door Once the new springs are installed and wound, it is time to test the garage door. Raise and lower the door a few times to make sure that it moves smoothly and doesn’t bind or catch on anything. Check that the door is balanced and level by raising it halfway and seeing if it stays in place. If the door falls or rises, you may need to adjust the springs further.
Step 7: Lubricate the garage door parts Finally, lubricate the moving parts of the garage door with a silicone-based lubricant to ensure smooth operation. Lubricate the springs, rollers, hinges, and tracks to reduce friction and prevent wear and tear.
In conclusion, as per Temple Garage Door, replacing old style garage door springs can be a challenging task, but with the right tools and knowledge, it is possible to do it yourself. Remember to follow the steps carefully and take your time to ensure that everything is done correctly. If you are unsure about any aspect of the process or encounter any difficulties, do not hesitate to seek the advice of a professional.
Temple Garage Doors & Gate
Temple, TX
254-221-8805