Rewiring Garage Door Repair Houston TX sensors may seem like a daunting task, but with the right tools and knowledge, it can be done relatively easily. Garage door sensors are an essential safety feature that prevents the door from closing when there is an obstruction in its path.
In this guide, we will take you through the steps of rewiring garage door sensors.
Step 1: Turn off Power The first step before attempting any electrical work is to turn off the power source. Locate the circuit breaker or fuse box that controls the power to the garage door opener and turn off the switch or remove the fuse.
Step 2: Remove the Sensors Locate the sensors that need rewiring. Most sensors are mounted on the garage door tracks, near the bottom of the door. Unscrew the sensors from their mountings and remove them from the brackets.
Step 3: Remove the Wiring Carefully disconnect the wires from the sensors. Note down which wire connects to which terminal. The wires are typically color-coded; one wire is white, and the other is black or red.
Step 4: Prepare the New Wiring Measure the length of the new wires required and cut them accordingly. Ensure that you have enough wire to connect the sensors to the garage door opener. Strip the ends of the wires to expose the copper strands.
Step 5: Connect the New Wiring Connect the wires to the sensors according to the markings you made earlier. Most sensors have a terminal labeled “white” and another labeled “black” or “red.” Connect the white wire to the white terminal and the black or red wire to the black or red terminal.
Step 6: Mount the Sensors Mount the sensors back onto the brackets. Ensure that they are securely fastened and properly aligned. The sensors must be level with each other and facing each other for the door to function correctly.
Step 7: Test the Sensors Turn on the power to the garage door opener and test the sensors. Place an object in the door’s path, such as a cardboard box or broomstick, and attempt to close the door. The door should stop closing when it detects the obstruction.
Step 8: Secure the Wiring Secure the wiring to the wall or the garage door track using cable ties. Ensure that the wiring is not hanging loosely and is not touching any moving parts of the door.
Step 9: Final Checks Test the sensors again to ensure that they are working correctly. Double-check the wiring and ensure that everything is properly secured and connected.
In conclusion, rewiring Garage Door Repair Houston TX sensors is a relatively simple task that requires some basic electrical knowledge and tools. Always remember to turn off the power before starting any electrical work and ensure that everything is securely fastened before testing the door. With these steps, you can easily rewire your garage door sensors and ensure the safety of your family and property.
East Downtown Garage Door
4105 Leeland St, Houston, TX 77023, United States
1-713-322-7436