If you have a bent garage door panel, it can be a frustrating and unsightly problem. However, it is possible to repair a bent garage door panel without having to replace the entire door.

I recently had to repair a bent garage door panel, and it was a challenging but rewarding process.

Here’s how I went about it as stated in Rocklin Garage Door:

Step 1: Assess the damage The first step was to assess the damage to the panel. In my case, the panel was only slightly bent, so I decided to try to repair it rather than replace it.

Step 2: Remove the panel To repair the panel, I needed to remove it from the door. I disengaged the door opener and lifted the panel out of its track.

Step 3: Straighten the panel Using a rubber mallet, I gently hammered the bent area of the panel back into place. I was careful not to overdo it, as I didn’t want to create any new damage.

Step 4: Reinforce the panel After the panel was straightened, I installed a steel brace on the inside of the panel to reinforce it and prevent it from bending again in the future. I used self-tapping screws to attach the brace to the panel.

Step 5: Reinstall the panel Once the panel was reinforced, I reinstalled it into the door track and reconnected the door opener.

Step 6: Touch up the paint The panel was now straightened and reinforced, but it had some scratches and scuff marks from the damage. I used touch-up paint to make it look uniform with the rest of the door.

Throughout the process, I took safety precautions to protect myself and those around me. I wore protective gloves and goggles and used caution when working with sharp tools.

Overall, as per Rocklin Garage Door, repairing a bent garage door panel can be a challenging process, but it’s worth it to maintain the overall functionality and appearance of the door. If the damage is severe, it may be best to replace the panel entirely. However, if the damage is only slight, it’s possible to repair it with patience and persistence.

LMS Garage Door Rocklin

6505 Kingbird Ct #8, Rocklin, CA 95765

916-398-2359